Read millimetres and convert mm to cm
A centimetre contains ten millimetres. Divide a reading in mm by 10 to get cm: 11 mm = 1.1 cm, one small space beyond 1 cm. Eight millimetres is 0.8 cm, two spaces before 1 cm.
11 mm = 1.1 cm. The mark is between 1 cm and 2 cm.
The diagram shows a 20 mm window around your reading. It resizes with the page. For physical size, print the checked PDF or calibrate the online ruler.
| Millimetres | Centimetres | Where to look |
|---|---|---|
| 1 mm | 0.1 cm | First small space after zero |
| 8 mm | 0.8 cm | Two spaces before 1 cm |
| 11 mm | 1.1 cm | One space after 1 cm |
| 25 mm | 2.5 cm | Halfway between 2 and 3 cm |
| 100 mm | 10 cm | The 10 cm mark |
If the object starts at 20 mm and ends at 31 mm, its length is 31 − 20 = 11 mm. The endpoint alone is not the length. For more examples, see the ruler-reading guide.
How to print the 30 cm ruler
An A4 sheet is 21 cm wide, so the 30 cm ruler prints as two 15 cm pieces. Piece 2 has a glue tab that slides under the end of piece 1, and the 15 cm marks meet at the joint. If you print on A3, choose the ruler pack for a one-piece 30 cm ruler.
- Pick the template and your paper size above. Letter is the US and Canada standard; most other countries use A4.
- Press Print, or Save PDF if you are printing from a phone or another computer.
- In the print window set Scale to 100% (Chrome, Edge, Firefox) or Actual size (Adobe Reader, macOS Preview). Turn off "Fit to page" and "Shrink oversized pages".
- Before cutting, lay a real ruler or a bank card on the scale-check bars. The 5 cm bar must be 5 cm and the 2 in bar 2 in.
Reading a metric ruler
The numbered marks on a cm ruler show centimetres; each centimetre contains ten 1 mm spaces. To find a length in cm on a ruler, start at the printed zero line, follow the centimetre numbers and then count any extra millimetre spaces. For example, 2 cm = 20 mm, 8 cm = 80 mm and 10 cm = 100 mm.
Metric reference chart: exact mm-to-cm conversions
Read these lengths from the ruler marks. Familiar objects vary in size; do not use a pencil, button, fingernail or watch as an exact calibration reference.
| Millimetres | Centimetres | Reading the scale |
|---|---|---|
| 1.6 mm | 0.16 cm | Between the 1 and 2 mm ticks; an estimated reading |
| 8 mm | 0.8 cm | Two spaces before 1 cm |
| 10 mm | 1 cm | The 1 cm mark |
| 11 mm | 1.1 cm | One space after 1 cm |
| 20 mm | 2 cm | The 2 cm mark |
| 30 mm | 3 cm | The 3 cm mark |
| 50 mm | 5 cm | The marked span of the printed check bar |
| 100 mm | 10 cm | The 10 cm mark |
Which printable ruler should I choose?
- 2 cm ruler, actual size: a short 20 mm scale for small paper parts, labels and classroom comparisons.
- 8 cm ruler: an 80 mm scale for compact craft pieces and short edges.
- Printable 10 cm ruler: a 100 mm reference for everyday measuring and metric practice.
- 30 cm ruler: a longer ruler that joins from two pieces on A4 or Letter.
A centimetre is a unit, not a particular screen size. Print the original PDF at 100% / Actual size, verify the 5 cm check bar with a known reference and measure between the printed ticks. Do not treat the total cut-paper length, which includes a cutting tail, as the marked ruler length. Learn where 8 mm sits on a ruler, or try the worked exercises in our millimetres and centimetres guide.
Each numbered line is a centimetre, and each small line is a millimetre (10 per centimetre). The medium line halfway between numbers is 5 mm. A reading of 12 numbered lines plus 7 small lines is 12.7 cm, or 127 mm. The 150 mm ruler on the sheet is numbered in millimetres (10, 20, 30…). Engineers, 3D-printing hobbyists and anyone reading mm-based specs often find that easier.
| Metric | Inches | Nearest fraction |
|---|---|---|
| 1 cm | 0.394 | 3/8" |
| 2 cm | 0.787 | 13/16" |
| 5 cm | 1.969 | 1 15/16" |
| 10 cm | 3.937 | 3 15/16" |
| 15 cm | 5.906 | 5 7/8" |
| 20 cm | 7.874 | 7 7/8" |
| 25 cm | 9.843 | 9 13/16" |
| 30 cm | 11.811 | 11 13/16" |
Common uses
- Clothing sizesEU and Asian size charts are in centimetres.
- Paper and photo formatsCheck A-series sizes, photo prints and margins.
- School and lab workGeometry, physics experiments and graph drawing.
- HardwareScrew lengths, pipe diameters and 3D-printed parts in mm.
Frequently asked questions
Is this cm ruler accurate on A4?
Yes, when printed at 100% scale. Check the 5 cm bar at the bottom of the sheet against a real ruler, or lay a bank card on the outline. It should cover it exactly.
Can I print a 2 cm ruler at actual size?
Yes. Choose the 2 cm PDF for A4 or Letter. Its marked zero-to-2 cm span is 20 mm. Print at 100% / Actual size and verify the scale check before use.
Where can I get an 8 cm or printable 10 cm ruler?
Use the short-ruler downloads above or select the matching template in the generator. The 8 cm ruler has an 80 mm marked span; the 10 cm ruler has a 100 mm marked span.
My printout is slightly too small. What went wrong?
Almost always the print window was set to "Fit to page", "Fit to printable area" or "Shrink oversized pages", which shrinks the page by 3–6%. Print again with Scale 100% or Actual size. See how to print at actual size for every browser.
How many centimetres are in an inch?
Exactly 2.54 cm (25.4 mm). The bottom edge of the 30 cm ruler is marked in inches so you can compare.
How accurate is a printed ruler?
The sheet is drawn in real millimetres and inches, so at 100% scale it is as accurate as your printer, which is typically within 0.5 mm over 30 cm. Every sheet has scale-check bars and most have a bank-card outline so you can confirm the size before you rely on it. For engineering or construction tolerances, use a certified steel rule.
Last reviewed 2026-11-18.