Check the scale first. A 3% printing error changes a 64 mm PD by about 2 mm, which is enough to matter for strong prescriptions. Print at 100% and check the scale bars, or the bank-card outline, before measuring.
Detailed Step-by-Step Guide: Read our comprehensive editorial tutorial on How to Measure Pupillary Distance (PD) with a Ruler for in-depth mirror instructions, assistant techniques, dual monocular measurement (OD/OS), and ordering tips for Zenni, EyeBuyDirect and Warby Parker.
How to measure your PD with a mirror
- Cut out one of the rulers. Stand about 30 cm (12 in) in front of a mirror, in good light.
- Hold the ruler flat against your face, just under your eyes, with the millimetre marks at the top.
- Close your right eye and look straight ahead. Line up the 0 mark with the centre of your left pupil.
- Close your left eye and open your right. Without moving the ruler, read the mark under the centre of your right pupil. That number is your PD.
- Repeat a few times, resetting the ruler each time. Record the readings and investigate differences before using a result.
Measuring with a helper
Ask someone to sit at your eye level, about an arm's length away. Look at a point far behind them, not at their face. They hold the ruler under your eyes, line up 0 with your right pupil (their left), and read the mark at the centre of your left pupil. Looking into the distance keeps your eyes straight, which gives your distance PD, the number most glasses use.
Single PD, dual PD and near PD
| Term | What it means |
|---|---|
| Single PD | Pupil to pupil, for example 63 mm. Most adults fall between 54 and 74 mm. |
| Dual (monocular) PD | Separate right-eye and left-eye measurements to the face’s midline. The two values need not be equal; follow your dispensing professional’s instructions. |
| Near PD | A measurement for near viewing. Ask the dispensing professional which value your lenses require; do not calculate it by subtracting a fixed number. |
For the most accurate measurement, ask an optician. Professional fitting is especially important for progressive lenses, prism correction or a complex prescription.
How to get repeatable PD measurements
If one reading says 62 mm and the next says 66 mm, pause rather than averaging away the difference. Something changed in the setup. Check the print scale, keep the ruler level, use the same method and look at the same target each time.
- Write each reading down instead of trying to remember it.
- Remove and reposition the ruler between attempts. This checks whether you can reproduce the placement.
- Keep the ruler still when switching eyes in the mirror method. Ask a helper to watch for movement.
- Repeat the measurement a few times. Agreement is a useful check, but does not prove the result is accurate.
- If readings remain inconsistent, ask an optician to measure your PD before ordering lenses.
Record whether the result is a single distance PD or separate right/left values. Do not divide a single value in half and assume the two eyes are symmetrical. Do not subtract a standard amount to invent a near PD; ask the dispensing professional which measurement your lenses need.
Using this ruler for an online glasses order
Follow the retailer’s instructions about distance versus near PD and single versus dual values. This is an independent ruler, not an Eyebuydirect or Warby Parker product. A camera-free printable tool does not replace a lens fitting or an eye examination.
Sources: Specsavers: repeat-checking PD measurements and Cleveland Clinic: PD and professional measurement.
Frequently asked questions
What is a normal PD?
Most adults are between 54 and 74 mm, and the average is about 63 mm. Children are usually between 41 and 55 mm.
Can I measure PD myself accurately?
A printed ruler can help you take a home reading, but repeated readings do not guarantee accuracy. Verify printing first. If results vary or your lens requirements are complex, ask an optician to measure it.
Is PD on my prescription?
Often not. Many opticians measure it but do not write it down. You can ask your optician for it, or measure it with this ruler.
My printout is slightly too small. What went wrong?
Almost always the print window was set to "Fit to page", "Fit to printable area" or "Shrink oversized pages", which shrinks the page by 3–6%. Print again with Scale 100% or Actual size. See how to print at actual size for every browser.
Last reviewed 2026-11-02.