Reading an inch ruler
On the 1/16-inch scale shown here, each inch is split into 16 equal spaces. Count the spaces between whole-inch marks to check the scale on your own ruler. The length of each line tells you what it stands for:
- Longest line, with a number: a whole inch.
- Second longest, halfway between numbers: 1/2 inch.
- Third: the quarters, 1/4 and 3/4 inch.
- Fourth: the eighths, 1/8, 3/8, 5/8 and 7/8.
- Shortest: the sixteenths, 1/16, 3/16 and so on.
Step by step
- Put the 0 end of the ruler (the first line, not the edge of the ruler) at one end of the object.
- Note the last whole number before the other end. That is the whole inches.
- Count the small marks past that number to the end of the object. Each one is 1/16".
- Simplify the fraction: 8/16 = 1/2, 4/16 = 1/4, 6/16 = 3/8, 12/16 = 3/4. So 3 inches and 10 marks is 3 10/16 = 3 5/8".
Reading a centimetre and millimetre ruler
The numbered lines are centimetres, with ten equal millimetre spaces per centimetre. The slightly longer line in the middle is usually 5 mm. A reading of 7 numbered centimetres plus 4 extra millimetres is 7.4 cm, or 74 mm. Choose the unit that suits the task; changing to mm does not make the original reading more precise.
How big is 8 mm on a ruler?
8 mm is 0.8 cm. On a metric ruler, start at the printed 0 line and move eight small millimetre spaces to the right. You will be two millimetres before the 1 cm mark. Each space is 1 mm; the longer middle tick usually shows 5 mm.
- Find the scale labelled cm or mm, rather than the inch scale.
- Align the object's start with the printed zero line.
- Count eight equal small spaces from zero; do not count zero itself as the first millimetre.
- If starting at another mark, add 8 mm: from 2 cm, for example, the endpoint is 2.8 cm.
8 mm is approximately 0.315 inches. It is close to, but not exactly, 5/16 inch (7.9375 mm). For a real-size check, use our printable cm rulers at 100% scale, or calibrate the screen ruler. A diagram resizing to your phone's screen cannot guarantee physical size.
Measure when the zero mark is hard to use
Line up the start of the object with another clear mark and subtract the starting reading from the ending reading. If a card starts at 2 cm and ends at 9.4 cm, it measures 9.4 − 2 = 7.4 cm, or 74 mm. For a spare ruler to practise with, choose a printable centimetre ruler and check the printed scale first.
Common mistakes
- Starting at the ruler's edge instead of the 0 line. Many rulers have a few millimetres before 0.
- Reading at an angle. Look straight down at the mark to avoid parallax, and keep the ruler flat against the object.
- Mixing up eighths and sixteenths. Count the marks, then simplify.
- Using a printout that was scaled. Check the scale bars on our printable rulers before you trust a paper ruler.
Fractions to decimals cheat sheet
| Fraction | Decimal | mm | Fraction | Decimal | mm |
|---|---|---|---|---|---|
| 1/16" | 0.0625 | 1.59 | 9/16" | 0.5625 | 14.29 |
| 1/8" | 0.1250 | 3.17 | 5/8" | 0.6250 | 15.88 |
| 3/16" | 0.1875 | 4.76 | 11/16" | 0.6875 | 17.46 |
| 1/4" | 0.2500 | 6.35 | 3/4" | 0.7500 | 19.05 |
| 5/16" | 0.3125 | 7.94 | 13/16" | 0.8125 | 20.64 |
| 3/8" | 0.3750 | 9.52 | 7/8" | 0.8750 | 22.22 |
| 7/16" | 0.4375 | 11.11 | 15/16" | 0.9375 | 23.81 |
| 1/2" | 0.5000 | 12.70 | 1" | 1.0000 | 25.40 |
To convert any reading, use the inch fraction converter.
Frequently asked questions
What are the small lines on a ruler called?
They are graduations or tick marks. On an inch ruler the shortest are usually sixteenths of an inch. On a metric ruler they are millimetres.
How big is 8 mm on a ruler?
8 mm equals 0.8 cm. Count eight 1 mm spaces from zero on the metric scale; this is two millimetres before the 1 cm mark.
How many sixteenths are in an inch?
16. So 8/16 is half an inch and 4/16 is a quarter.
Is the edge of the ruler zero?
Not always. Many rulers have a small gap before the 0 line. Line up the 0 mark, not the edge, unless your ruler is a zero-edge ruler.
Last reviewed 2026-11-09.